D-Link xStack DGS-3420 Series - Delete Syslog Host

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
723
enable - Enable the host to receive messages.
disable - Disable the host to receive messages.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create a new syslog host:
DGS-3420-28SC:admin# create syslog host 1 ipaddress 10.1.1.1
Command: create syslog host 1 ipaddress 10.1.1.1
Success.
DGS-3420-28SC:admin#
63-17 delete syslog host
Description
This command is used to delete syslog host(s).
Format
delete syslog host [<index 1-4> | all]
Parameters
<inex 1-4> - Specify the host index.
all - Specify all hosts.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete a syslog host:
DGS-3420-28SC:admin#delete syslog host 4
Command: delete syslog host 4
Success
DGS-3420-28SC:admin#