D-Link xStack DGS-3420 Series - Show Syslog; Config Syslog Host

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
720
Example
To disable syslog sending a message:
DGS-3420-28SC:admin#disable syslog
Command: disable syslog
Success
DGS-3420-28SC:admin#
63-14 show syslog
Description
This command is used to display the syslog protocol global state.
Format
show syslog
Parameters
None.
Restrictions
None.
Example
To display the syslog protocol global state:
DGS-3420-28SC:admin#show syslog
Command: show syslog
Syslog Global State: Enabled
DGS-3420-28SC:admin#
63-15 config syslog host
Description
This command is used to configure the syslog host configuration.