D-Link xStack DGS-3420 Series - Show Syslog Host

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
724
63-18 show syslog host
Description
This command is used to display syslog host configurations.
Format
show syslog host {<index 1-4>}
Parameters
<index 1-4> - (Optional) Specify the host index.
Note: If no parameter is specified, all hosts will be displayed.
Restrictions
None.
Example
To display syslog host configurations:
DGS-3420-28SC:admin#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host 1
IP Address : 10.1.1.2
Severity : Warning
Facility : Local10
UDP port : 514
Status : Disabled
Host 2
IP Address : 3000:501:100:ffff:101:202:303:1
Severity : Emergency
Facility : Local10
UDP port : 514
Status : Disabled
Total Entries : 2
DGS-3420-28SC:admin#