D-Link xStack DGS-3420 Series - Enable Sntp

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
965
Format
show sntp
Parameters
None.
Restrictions
None.
Example
To show SNTP:
DGS-3420-28SC:admin#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP Status : Disabled
IPv4 Primary SNTP Server : None
IPv4 Secondary SNTP Server: None
IPv6 Primary SNTP Server : None
IPv6 Secondary SNTP Server: None
SNTP Poll Interval : 720 sec
DGS-3420-28SC:admin#
26-4 enable sntp
Description
This command is used to turn on SNTP support.
Format
enable sntp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.