D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
462
39-23 show igmp_snooping forward_lookup_mode
Description
The command is used to display the IGMP snooping forward lookup mode on the Switch.
Format
show igmp_snooping forward_lookup_mode
Parameters
None.
Restrictions
None.
Example
To display the IGMP snooping forward lookup mode:
DGS-3420-28SC:admin#show igmp_snooping forward_lookup_mode
Command: show igmp_snooping forward_lookup_mode
IGMP snooping forward lookup mode: MAC address.
DGS-3420-28SC:admin#
39-24 config igmp access_authentication ports
Description
This command is used to enable or disable the IGMP Access Control function for the specified ports. If
the IGMP Access Control function is enabled and the Switch receives an IGMP JOIN message, the
Switch will send the access request to the RADIUS server for authentication.
Format
config igmp access_authentication ports [all | <portlist>] state [enable {[auth_accounting |
auth_only | accounting_only]} | disable]
Parameters
all - Specify all ports to be configured.
<portlist> - Specify a range of ports to be configured.
state - Specify the state of the RADIUS authentication function on the specified ports.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English