D-Link xStack DGS-3420 Series - Enable Mirror

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
639
Parameters
<value 1-4> - Enter the mirror group ID used here. This value must be between 1 and 4.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete mirror group 3:
DGS-3420-28SC:admin# delete mirror group_id 3
Command: delete mirror group_id 3
Success.
DGS-3420-28SC:admin#
56-5 enable mirror
Description
This command, combined with the disable mirror command below, allows you to enable or disable
mirror function without having to modify the mirror session configuration.
Note: If the target port hasn’t been set, enable mirror will not take effect.
Format
enable mirror
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable mirroring configurations:
DGS-3420-28SC:admin#enable mirror
Command: enable mirror