D-Link xStack DGS-3420 Series - Enable Web

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
23
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable Telnet:
DGS-3420-28SC:admin#disable telnet
Command: disable telnet
Success.
DGS-3420-28SC:admin#
2-18 enable web
Description
This command is used to enable Web UI and configure the port number. The default setting is enabled
and the port number is 80.
Format
enable web {<tcp_port_number 1-65535>}
Parameters
<tcp_port_number 1-65535> - (Optional) Specify the TCP port number. TCP ports are numbered
between 1 and 65535. The “well-know” TCP port for the Web protocol is 80.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable HTTP and configure port number:
DGS-3420-28SC:admin#enable web 80
Command: enable web 80
Note: SSL will be disabled if web is enabled.
Success.
DGS-3420-28SC:admin#