D-Link xStack DGS-3420 Series - Enable Ssh; Disable Ssh

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
918
Example
To configure an SSH server maximum session of 3:
DGS-3420-28SC:admin#config ssh server maxsession 3
Command: config ssh server maxsession 3
Success.
DGS-3420-28SC:admin#
17-8 enable ssh
Description
This command is used to enable SSH server services.
Format
enable ssh
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable SSH:
DGS-3420-28SC:admin#enable ssh
Command: enable ssh
Success.
DGS-3420-28SC:admin#
17-9 disable ssh
Description
This command is used to disable SSH server services.
Format
disable ssh