D-Link xStack DGS-3420 Series - Show Dhcp Binding

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
321
Example
To clear dynamic binding entries in the pool named “engineering”:
DGS-3420-28SC:admin#clear dhcp binding engineering 10.20.3.4
Command: clear dhcp binding engineering 10.20.3.4
Success.
DGS-3420-28SC:admin#
22-28 show dhcp binding
Description
This command is used to display dynamic binding entries.
Format
show dhcp binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Specify a DHCP pool name.
Restrictions
None.
Example
To display dynamic binding entries for “engineering”:
DGS-3420-28SC:admin#show dhcp binding engineering
Command: show dhcp binding engineering
Pool Name IP Addresss Hardware Address Type Status Lifetime
------------ -------------- ------------------ -------- ------- ---------
engineering 192.168.0.1 00-80-C8-08-13-88 Ethernet Manual 86400
engineering 192.168.0.2 00-80-C8-08-13-99 Ethernet Automatic 86400
engineering 192.168.0.3 00-80-C8-08-13-A0 Ethernet Automatic 86400
engineering 192.168.0.4 00-80-C8-08-13-B0 Ethernet Automatic 86400
Total Entries: 4
DGS-3420-28SC:admin#