xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
599
OID : 1.3.6.1.4.1.171.10.114.1.1
Advertising Ports :
Total Entries : 1
51-19 show lldp remote_ ports
Description
This command is used to display the information learned from the neighbor parameters.
Format
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist> - (Optional) Specify the ports to be displayed. When a port list is not specified, information
for all ports will be displayed.
mode - (Optional) Select the mode: brief, normal, or detailed.
brief - Specify to display the information in brief mode.
normal - Specify to display the information in normal mode. This is the default display mode.
detailed - Specify to display the information in detailed mode.
Restrictions
None.
Example
To display LLDP information for remote ports 1 and 2:
DGS-3420-28SC:admin#show lldp remote_ports 1-2
Command: show lldp remote_ports 1-2
Remote Entities Count : 0
51-20 show lldp statistics
Description
This command is used to display an overview of neighbor detection activity on the switch.