EasyManua.ls Logo

D-Link xStack DGS-3420 Series - Page 603

D-Link xStack DGS-3420 Series
1117 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
598
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype : MAC Address
Port ID : 00-01-02-03-05-00
Port Description : D-Link DGS-3420-28SC R1.50.010
Port 1 on Unit 1
Port PVID : 1
Management Address Count : 1
PPVID Entries Count : 0
VLAN Name Entries Count : 1
Protocol Identity Entries Count : 0
MAC/PHY Configuration/Status : (See Detail)
Link Aggregation : (See Detail)
Maximum Frame Size : 1536
DGS-3420-28SC:admin#
51-18 show lldp mgt_addr
Description
This command is used to display the LLDP management address.
Format
show lldp mgt_addr {[ipv4 {<ipaddr>} | ipv6 {<ipv6addr>}]}
Parameters
ipv4 - (Optional) Specify the IPv4 address of the LLDP managament address entry.
<ipaddr> - Specify the IPv4 address of the LLDP managament address entry.
ipv6 - (Optional) Specify the IPv6 address of the LLDP managament address entry.
<ipv6addr> - Specify the IPv6 address of the LLDP managament address entry.
Restrictions
None.
Example
To display the LLDP management address:
DGS-3420-28SC:admin#show lldp mgt_addr
Command: show lldp mgt_addr
Address 1 :
------------------------------------------------------
Subtype : IPv4
Address : 10.19.72.38

Table of Contents

Related product manuals