D-Link xStack DGS-3420 Series

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
719
63-12 enable syslog
Description
This command is used to globally enable syslog to send log messages to a remote server.
Format
enable syslog
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable syslog to send a message:
DGS-3420-28SC:admin#enable syslog
Command: enable syslog
Success
DGS-3420-28SC:admin#
63-13 disable syslog
Description
This command is used to disable syslog from sending a message.
Format
disable syslog
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.