D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
605
Example
To enable loop detection:
DGS-3420-28SC:admin#enable loopdetect
Command: enable loopdetect
Success.
DGS-3420-28SC:admin#
52-5 disable loopdetect
Description
This command allows the loop detection function to be globally disabled on the switch. The default
value is disabled.
Format
disable loopdetect
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable loop detection:
DGS-3420-28SC:admin#disable loopdetect
Command: disable loopdetect
Success.
DGS-3420-28SC:admin#
52-6 show loopdetect
Description
This command is used to display the switch’s current loop detection configuration.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English