D-Link xStack DGS-3420 Series - Show Wac Ports

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1056
Command: show wac
Web-based Access Control
-----------------------------
State : Enabled
Method : RADIUS
Redirect Path : http://www.dlink.com
Virtual IP : 0.0.0.0
Virtual IPv6 : 2000::20
Switch HTTP Port : 80 (HTTP)
RADIUS Authorization : Enabled
Local Authorization : Enabled
DGS-3420-28SC:admin#
34-14 show wac ports
Description
This command is used to display WAC port information.
Format
show wac ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of member ports to display the status.
Restrictions
None.
Example
To display WAC ports 1 to 3:
DGS-3420-28SC:admin# show wac ports 1-3
Command: show wac ports 1-3
Port State Aging Time Idle Time Block Time
(min) (min) (sec)
------- -------- ------------ ---------- -----------
1 Disabled 1440 Infinite 60
2 Disabled 1440 Infinite 60
3 Disabled 1440 Infinite 60
DGS-3420-28SC:admin#