D-Link xStack DGS-3420 Series

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
222
16-2 disable command logging
Description
The disable command logging command is used to disable the command logging function.
Format
disable command logging
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the command logging:
DGS-3420-28SC:admin# disable command logging
Command: disable command logging
Success.
DGS-3420-28SC:admin#
16-3 show command logging
Description
This command displays the switch’s general command logging configuration status.
Format
show command logging
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.