D-Link xStack DGS-3420 Series - Config Terminal Width

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
29
UserName:
2-25 clear
Description
This command is used to clear the terminal screen.
Format
clear
Parameters
None.
Restrictions
None.
Example
To clear the terminal screan:
DGS-3420-28SC:admin#clear
Command: clear
2-26 config terminal width
Description
This command is used to configure the terminal width.
Format
config terminal width [default | <value 80-200>]
Parameters
default - Specify the default terminal width value.
<value 80-200> - Specify a terminal width value between 80 and 200 characters. The default value is
80.
Restrictions
None.