D-Link xStack DGS-3420 Series - Show Ssl

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
926
To disable the SSL feature:
DGS-3420-28SC:admin# disable ssl
Command: disable ssl
Success.
DGS-3420-28SC:admin#
18-4 show ssl
Description
This command is used to display the current SSL status and supported ciphersuites.
Format
show ssl {certificate {[chain | <path_filename 64>]}}
Parameters
certificate - (Optional) Specify the certificate type.
chain - Specifies to view the chain of certifications on the Switch.
<path_filename 64> - Enter the path filename used here. This name can be up to 64
characters long.
Restrictions
None.
Example
To display SSL:
DGS-3420-28SC:admin# show ssl
Commands: show ssl
SSL Status Disabled
RSA_WITH_RC4_128_MD5 Enabled
RSA_WITH_3DES_EDE_CBC_SHA Enabled
DHE_DSS_WITH_3DES_EDE_CBC_SHA Enabled
RSA_EXPORT_WITH_RC4_40_MD5 Enabled
DGS-3420-28SC:admin#
To display the SSL certificate: