D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
79
DGS-3420-28SC:admin#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
--------------- -------- ----- ------- ---------- -----------------------
10.1.1.222 TACACS+ 15555 10 ------ 123
Total Entries : 1
DGS-3420-28SC:admin#
4-24 config authen parameter response_timeout
Description
This command is used to configure the amount of time waiting for user to input on console, Telnet, and
SSH applications.
Format
config authen parameter response_timeout <int 0-255>
Parameters
<int 0-255> - Specify the amount of time for user input on console or Telnet or SSH. 0 means there
is no time out. The default value is 30 seconds.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure 60 seconds for user to input:
DGS-3420-28SC:admin#config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DGS-3420-28SC:admin#
4-25 config authen parameter attempt
Description
This command is used to configure the maximum attempts for users trying to login or promote the
privilege on console, Telnet, or SSH applications. If the failure value is exceeded, connection or
access will be locked.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English