D-Link xStack DGS-3420 Series - Show Accounting

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
102
Format
delete accounting method_list_name <string 15>
Parameters
<string 15> - Enter the name of the user-defined method list here. This name can be up to 15
characters long.
Restrictions
Only Administrator level users can issue this command.
Example
To delete the user-defined accounting method list called “shell_acct” from switch:
DGS-3420-28SC:admin#delete accounting method_list_name shell_acct
Command: delete accounting method_list_name shell_acct
Success.
DGS-3420-28SC:admin#
4-55 show accounting
Description
This command is used to display the method list of accounting methods on switch.
Format
show accounting [default | method_list_name <string 15> | all]
Parameters
default - Displays the user-defined list of default accounting methods.
method_list_name - Displays the user-defined list of specific accounting methods.
<string 15> - Enter the user-defined method list name here. This name can be up to 15
characters long.
all - Displays all accounting method lists on switch.
Restrictions
Only Administrator level users can issue this command.
Example
To display the user-defined accounting method list called “shell_acct”: