D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
813
DGS-3420-28SC:admin#config dscp trust 1:1-1:8 state enable
Command: config dscp trust 1:1-1:8 state enable
Success.
DGS-3420-28SC:admin#
5-19 show dscp trust
Description
This command is used to display DSCP trust state for the specified ports on the Switch.
Format
show dscp trust {<portlist>}
Parameters
<portlist> - (Optional) A range of ports to display.
If not specify the port, all ports for DSCP trust status on the Switch will be displayed.
Restrictions
None.
Example
Display DSCP trust status on ports 1:1-1:8.
DGS-3420-28SC:admin#show dscp trust 1:1-1:8
Command: show dscp trust 1:1-1:8
Port DSCP-Trust
---- ----------
1:1 Enabled
1:2 Enabled
1:3 Enabled
1:4 Enabled
1:5 Enabled
1:6 Enabled
1:7 Enabled
1:8 Enabled
DGS-3420-28SC:admin#

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English