D-Link xStack DGS-3420 Series

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
30
Example
To configure the terminal width:
DGS-3420-28SC:admin#config terminal width 90
Command: config terminal width 90
Success.
DGS-3420-28SC:admin#
2-27 show terminal width
Description
This command is used to display the configuration of the current terminal width.
Format
show terminal width
Parameters
None.
Restrictions
None.
Example
To display the configuration of the current terminal width:
DGS-3420-28SC:admin#show terminal width
Command: show terminal width
Global terminal width : 80
Current terminal width : 80
DGS-3420-28SC:admin#
2-28 show device_status
Description
This command displays current status of power(s) and fan(s) on the system.