xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
277
19-42 debug vrrp state
Description
The command is used to enable or disable the VRRP debug state.
Format
debug vrrp state [enable | disable]
Parameters
enable - Specify that the VRRP debug state will be enabled.
disable - Specify that the VRRP debug state will be disabled.
Restrictions
Only Administrator level can issue this command.
Example
To enable the VRRP debug state:
DGS-3420-28SC:admin#debug vrrp state enable
Command: debug vrrp state enable
Success.
To Next Page
Loading...
