D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
606
Format
show loopdetect
Parameters
None.
Restrictions
None.
Example
To display the switch’s current loop detection configuration:
DGS-3420-28SC:admin#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
Status : Disabled
Mode : Port-based
Interval : 10 sec
Recover Time : 60 sec
Trap State : None
Enabled VLANs : 1-4094
Log State : Enabled
Function Version : v4.05
DGS-3420-28SC:admin#
52-7 show loopdetect ports
Description
This command is used to display the switch’s current per-port loop detection configuration and status.
Format
show loopdetect ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English