D-Link xStack DGS-3420 Series - Create Fdb Vlanid

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
409
DGS-3420-28SC:admin#
34-2 create fdb vlanid
Description
This command is used to create an entry into the switch’s unicast MAC address forwarding database
using the VLAN ID.
Format
create fdb vlanid <vidlist> <macaddr> [port <port> | drop]
Parameters
<vidlist> - Enter the VLAN ID used here.
<macaddr> - Specify the MAC address to be added to the static forwarding table.
port - The switch will always forward traffic to the specified device through this port.
<port> - Specify the port number corresponding to the MAC destination address.
drop - Specify to have the switch drop traffic.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an unicast MAC forwarding:
DGS-3420-28SC:admin#create fdb vlanid 1 00-11-22-33-44-55 port 1:5
Command: create fdb vlanid 1 00-11-22-33-44-55 port 1:5
Success.
DGS-3420-28SC:admin#
34-3 create multicast_fdb
Description
This command is used to create a static entry into the multicast MAC address forwarding table.
Format
create multicast_fdb <vlan_name 32> <macaddr>