D-Link xStack DGS-3420 Series - Show Vlan

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1033
32-12 show vlan
Description
This command is used to display summary information about each VLAN, which includes: VLAN ID,
VLAN Name, Tagged/Untagged/Forbidden status for each port, and Member/Non-member status for
each port.
Format
show vlan {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Specify the name of the VLAN to be displayed. The maximum length is
32 characters.
Restrictions
None.
Example
To display VLAN settings:
DGS-3420-28SC:admin#show vlan
Command: show vlan
VLAN Trunk State : Disabled
VLAN Trunk Member Ports :
VID : 1 VLAN Name : default
VLAN Type : Static Advertisement : Enabled
Member Ports : 1-28
Static Ports : 1-28
Current Tagged Ports :
Current Untagged Ports: 1-28
Static Tagged Ports :
Static Untagged Ports : 1-28
Forbidden Ports :
Total Static VLAN Entries: 1
Total GVRP VLAN Entries: 0