D-Link xStack DGS-3420 Series - Config Authen Application

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
70
Format
show authen_enable [default | method_list_name <string 15> | all]
Parameters
default - Specify to display the default method list for promoting a user's privilege to Administrator
level.
method_list_name - Specify the user-defined method list for promoting a user's privilege to
Administrator level.
<string 15> - Specify the user-defined method list for a promoting a user's privilege to
Administrator level . The method list name value can be up to 15 characters long.
all - Specify to display all method lists for promoting a user's privilege to Administrator level.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all method lists for promoting a user's privilege to Administrator level:
DGS-3420-28SC:admin#show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
---------------- -------- --------------- ------------------
default 1 local_enable Keyword
enable_list_1 1 tacacs+ Built-in Group
2 tacacs Built-in Group
3 mix_1 User-defined Group
4 loca_enable Keyword
enable_list_2 1 tacacs+ Built-in Group
2 radius Built-in Group
Total Entries : 3
DGS-3420-28SC:admin#
4-14 config authen application
Description
This command is used to configure login or enable method list for all or the specified application.