D-Link xStack DGS-3420 Series - Chapter 30 Virtual Router Redundancy Protocol (VRRP) Commands; Enable Vrrp

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1006
Chapter 30 Virtual Router
Redundancy Protocol (VRRP)
Commands
enable vrrp {ping}
disable vrrp {ping}
create vrrp vrid <vrid 1-255> ipif <ipif_name 12> ipaddress <ipaddr> {state [enable | disable] | priority
<int 1-254> | advertisement_interval <int 1-255> | preempt [true | false] | critical_ip <ipaddr> |
critical_ip_state [enable | disable]}
config vrrp vrid <vrid 1-255> ipif <ipif_name 12> {state [enable | disable] | priority <int 1-254> |
ipaddress <ipaddr> | advertisement_interval <int 1-255> | preempt [true | false] | critical_ip
<ipaddr> | critical_ip_state [enable | disable]}
config vrrp ipif <ipif_name 12> [authtype [none | simple authdata <string 8> | ip authdata <string
16>]]
delete vrrp {vrid <vrid 1-255> ipif <ipif_name 12>}
show vrrp {ipif <ipif_name 12> {vrid <vrid 1-255>}}
30-1 enable vrrp
Description
This command is used to enable VRRP globally.
Format
enable vrrp {ping}
Parameters
ping - (Optional) Specify that the ping option will be enabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable VRRP: