D-Link xStack DGS-3420 Series - Page 1010

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1005
Command: config tftp source_ipif System 10.90.90.90
Success.
DGS-3420-28SC:admin#
29-27 show tftp source_ipif
Description
This command is used to show the configured source address for TFTP.
Format
show tftp source_ipif
Parameters
None.
Restrictions
None.
Example
To display the source address for TFTP:
DGS-3420-28SC:admin#show tftp source_ipif
Command: show tftp source_ipif
Telnet Source IP Interface Configuration:
IP Interface : System
IPv4 Address : 10.90.90.90
IPv6 Address : None
DGS-3420-28SC:admin#