D-Link xStack DGS-3420 Series - Show Nlb Fdb

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
686
Format
config nlb multicast_fdb [<vlan_name 32> | vlanid <vlanid 1-4094>] <macaddr> [add | delete]
<portlist>
Parameters
<vlan_name 32> - Enter the VLAN name of the NLB multicast FDB entry here. This name can be
up to 32 characters long.
vlanid - Specifies the VLAN ID used.
<vlanid 1-4094> - Enter the VLAN ID used here.
<macaddr> - Specifies the MAC address of the NLB multicast FDB entry to be configured.
add - Specifies a list of forwarding ports to be added.
delete - Specifies a list of forwarding ports to be deleted.
<portlist> - Specifies a list of forwarding ports to be added or deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure NLB multicast MAC forwarding database:
DGS-3420-28SC:admin# config nlb multicast_fdb default 03-bf-01-01-01-01 add 1:1-1:5
Command: config nlb multicast_fdb default 03-bf-01-01-01-01 add 1:1-1:5
Success.
DGS-3420-28SC:admin#
61-4 show nlb fdb
Description
This command is used to show the NLB configured entry.
Format
show nlb fdb
Parameters
None.
Restrictions
None.