D-Link xStack DGS-3420 Series - Page 690

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
685
Example
To create a NLB multicast FDB entry:
DGS-3420-28SC:admin# create nlb multicast_fdb default 03-bf-01-01-01-01
Command: create nlb multicast_fdb default 03-bf-01-01-01-01
Success.
DGS-3420-28SC:admin#
61-2 delete nlb multicast_fdb
Description
This command is used to delete the Switch’s NLB multicast FDB entry.
Format
delete nlb multicast_fdb [<vlan_name 32> | vlanid <vlanid 1-4094>] <macaddr>
Parameters
<vlan_name 32> - Enter the VLAN name of the NLB multicast FDB entry here. This name can be
up to 32 characters long.
vlanid - Specifies the VLAN ID used.
<vlanid 1-4094> - Enter the VLAN ID used here.
<macaddr> - Specifies the MAC address of the NLB multicast FDB entry to be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete NLB multicast FDB entry:
DGS-3420-28SC:admin# delete nlb multicast_fdb default 03-bf-01-01-01-01
Command: delete nlb multicast_fdb default 03-bf-01-01-01-01
Success.
DGS-3420-28SC:admin#
61-3 config nlb multicast_fdb
Description
This command is used to configure the Switch’s NLB multicast FDB entry.