xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
905
Success.
16-9 enable stp
Description
Although it is possible to modify to allow a user to enable STP per instance, CIST should be enabled
first before enabling other instances. When a user enables the CIST, all MSTIs will be enabled
automatically if FORCE_VERSION is set to MSTP and there is at least one VLAN mapped to this
instance.
Format
enable stp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable STP:
DGS-3420-28SC:admin#enable stp
Command: enable stp
Success.
16-10 disable stp
Description
This command is used to disable STP functionality in every existing instance.
Format
disable stp
To Next Page
Loading...
