xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
588
DGS-3420-28SC:admin#config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Success.
To exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
DGS-3420-28SC:admin#config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Success.
To exclude the protocol identity TLV from the outbound LLDP advertisements for all ports:
DGS-3420-28SC:admin#config lldp ports all dot1_tlv_protocol_identity all enable
Command: config lldp ports all dot1_tlv_protocol_identity all enable
Success.
To exclude the MAC/PHY configuration/status TLV from the outbound LLDP advertisements for all
ports:
DGS-3420-28SC:admin#config lldp ports all dot3_tlvs mac_phy_configuration_status
enable
Command: config lldp ports all dot3_tlvs mac_phy_configuration_status enable
Success.
51-8 show lldp ports
Description
This command is used to display LLDP per port configuration for advertisement options.
Format
show lldp ports {
<portl
ist>}
To Next Page
Loading...
