D-Link xStack DGS-3420 Series - Show Qinq Ports

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
818
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the inner TPID in the system to 0x9100:
DGS-3420-28SC:admin# config qinq inner_tpid 0x9100
Command: config qinq inner_tpid 0x9100
Success.
DGS-3420-28SC:admin#
6-6 show qinq inner_tpid
Description
This command is used to display the inner TPID of the system.
Format
show qinq inner_tpid
Parameters
None.
Restrictions
None.
Example
To display the inner TPID of the system:
DGS-3420-28SC:admin#show qinq inner_tpid
Command: show qinq inner_tpid
Inner TPID: 0x8100
DGS-3420-28SC:admin#
6-7 show qinq ports
Description
This command is used to display the Q-in-Q configuration of ports.