D-Link xStack DGS-3420 Series - Page 824

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
819
Format
show qinq ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
Note: If no parameter specified, the system will display port information for all ports.
Restrictions
None.
Example
To display the Q-in-Q mode for ports 1 to 2:
DGS-3420-28SC:admin#show qinq ports 1-2
Command: show qinq ports 1-2
Port ID: 1
---------------------------------------------------------
Role: NNI
Miss Drop: Disabled
Outer Tpid: 0x8100
Use Inner Priority: Disabled
Add Inner Tag: Disabled
Port ID: 2
---------------------------------------------------------
Role: NNI
Miss Drop: Disabled
Outer Tpid: 0x8100
Use Inner Priority: Disabled
Add Inner Tag: Disabled
DGS-3420-28SC:admin#
6-8 create vlan_translation ports
Description
This command is used to create translation relationships between C-VLAN and S-VLAN. This setting
will not be effective when the Q-in-Q mode is disabled. This configuration is only effective for a UNI
port. At the UNI port, the ingress C-VLAN tagged packets will be translated to S-VLAN tagged packets