D-Link xStack DGS-3420 Series - Page 602

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
597
Extended Power Via MDI
Power Device Type: PD Device
Power Priority : High
Power Source : From PSE
Power Request : 8 Watts
Inventory Management:
Hardware Revision :
Firmware Revision :
Software Revision :
Serial Number :
Manufacturer Name :
Model Name :
Asset ID :
DGS-3420-28SC:admin#
51-17 show lldp local_ports
Description
This command is used to display the per-port information currently available for populating outbound
LLDP advertisements.
Format
show lldp local ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist> - (Optional) Specify the ports to be displayed. When a port list is not specified, information
for all ports will be displayed.
mode - (Optional) Select the mode: brief, normal, or detailed.
brief - Specify to display the information in brief mode.
normal - Specify to display the information in normal mode. This is the default display mode.
detailed - Specify to display the information in detailed mode.
Restrictions
None.
Example
To display LLDP local port information for port 1:
DGS-3420-28SC:admin#show lldp local_ports 1
Command: show lldp local_ports 1