D-Link xStack DGS-3420 Series - Page 972

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
967
Parameters
<date ddmthyyyy> - Specify the system clock date.
<time hh:mm:ss> - Specify the system clock time.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure time:
DGS-3420-28SC:admin# config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DGS-3420-28SC:admin#
26-7 config time_zone
Description
This command is used to change time zone settings.
Format
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min <minute 0-59>} (3)
Parameters
operator - Specify the operator of the time zone.
+ - Positive.
- - Negative.
hour - Specify the hour of the time zone.
<gmt_hour 0-13> - Specify the hour of the time zone between 0 and 13.
min - Specify the minute of the time zone.
<minute 0-59> - Specify the minute of the time zone between 0 and 59.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the time zone:
DGS-3420-28SC:admin#config time_zone operator + hour 2 min 30