D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1022
DGS-3420-28SC:admin#
31-12 show voice_vlan voice_device
Description
This command is used to show voice devices that are connected to the ports. The start time is the time
when the device is detected on this port and the activate time is the latest time when the device sends
the traffic.
Format
show voice_vlan voice_device {ports <portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to display.
Note: If no parameter is specified, the system will display the connected Voice device of all
ports.
Restrictions
None.
Example
To display voice VLAN device ports 1 to 2:
DGS-3420-28SC:admin#show voice_vlan voice_device ports 1-2
Command: show voice_vlan voice_device ports 1-2
Ports Voice Device Start Time Last Active Time
----- ----------------- ---------------- -----------------
Total Entries : 0
DGS-3420-28SC:admin#

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English