D-Link xStack DGS-3420 Series - Page 1081

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1076
Log Message: The downloaded configurations executed by <session>
successfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: The downloaded configurations execute
unsuccessfully.
Log Message: The downloaded configurations executed by <session>
unsuccessfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Warning
Event description: Attack log message uploaded successfully.
Log Message: Attack log message uploaded by <session>
successfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Informational
Event description: Attack log message upload unsuccessfully.
Log Message: Attack log message upload by <session>
unsuccessfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Warning
TFTP Client
Event description: Firmware upgraded successfully.
Log Message: [Unit <unitID>,] Firmware upgraded by <session>
successfully (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
UnitID: Represent the id of the device in the stacking system.
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
Informational