D-Link xStack DGS-3420 Series - Page 1086

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1081
ipaddr: The IP address of the RADIUS server.
vlanID: The VID of RADIUS assigned VLAN.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Event description: Ingress bandwidth assigned from RADIUS server
after RADIUS client is authenticated by RADIUS server
successfully .This Ingress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned ingress
bandwidth :<ingressBandwidth> to port <[unitID:]portNum> (account :
<username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
ingressBandwidth: The ingress bandwidth of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Informational
Event description: Egress bandwidth assigned from RADIUS server
after RADIUS client is authenticated by RADIUS server
successfully .This egress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned egress
bandwidth :<egressBandwidth> to port <[unitID:]portNum> (account:
<username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
egressBandwidth: The egress bandwidth of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Informational
Event description: 802.1p default priority assigned from RADIUS
server after RADIUS client is authenticated by RADIUS server
successfully. This 802.1p default priority will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned 802.1p default
priority:<priority> to port <[unitID:]portNum> (account : <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
priority: Priority of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Informational
Event description: Failed to assign ACL profiles/rules from RADIUS
server.
Log Message: RADIUS server <ipaddr> assigns <username> ACL
failure at port <[unitID]portNum> (<string>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
unitID: The unit ID.
Warning