D-Link xStack DGS-3420 Series - Page 1099

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1094
<macaddr>)]
Parameters description:
InstanceID: Instance ID.
portNum:Port ID
macaddr: MAC address
Event description: Spanning Tree new Root Bridge
Log Message: [CIST | CIST Regional | MSTI Regional] New Root
bridge selected( [Instance: <InstanceID> ]MAC: <macaddr>
Priority :<value>)
Parameters description:
InstanceID: Instance ID.
macaddr: Mac address
value: priority value
Informational
Event description: Spanning Tree Protocol is enabled
Log Message: Spanning Tree Protocol is enabled
Informational
Event description: Spanning Tree Protocol is disabled
Log Message: Spanning Tree Protocol is disabled
Informational
Event description: New root port
Log Message: New root port selected [( [Instance:<InstanceID> ],
port:<[unitID:] portNum>)]
Parameters description:
InstanceID: Instance ID.
portNum:Port ID
Notice
Event description: Spanning Tree port status changed
Log Message: Spanning Tree port status changed
[( [Instance:<InstanceID> ], port:<[unitID:] portNum>)] <old_status> -
>
<new_status>
Parameters description:
InstanceID: Instance ID.
portNum: Port ID
old_status: Old status
new_status: New status
Notice
Event description: Spanning Tree port role changed.
Log Message: Spanning Tree port status changed.
[( [Instance:<InstanceID> ], port:<[unitID:] portNum>)] <old_role> ->
<new_role>
Parameters description:
InstanceID: Instance ID.
portNum:Port ID/
old_role: Old role
new_status:New role
Informational
Event description: Spanning Tree instance created.
Log Message: Spanning Tree instance created.
Instance:<InstanceID>
Informational