D-Link xStack DGS-3420 Series - Page 115

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
110
auto_assign - Specify to automatically assign the access ID.
<value 1-256> - Specify a value between 1 and 256.
ethernet - Specify an Ethernet access control list rule.
vlan - Specify the VLAN name.
<vlan_name 32> -Specify the VLAN name. The maximum length is 32 characters.
vlanid - Specify the VLAN ID.
<vlanid 1-4094> - Specify the VLAN ID between 1 and 4094.
mask - (Optional) Specify the mask.
<hex 0x0-0x0fff> - Specify the mask.
source_mac - Specify the source MAC address.
<macaddr> - Specify the source MAC address.
mask - (Optional) Specify the mask.
<macmask> - Specify the mask.
destination_mac - Specify the destination MAC address.
<macaddr> - Specify the destination MAC address.
mask - (Optional) Specify the mask.
<macmask> - Specify the mask.
802.1p - Specify the value of the 802.1p priority tag.
<value 0-7> - Specify the value of the 802.1p priority tag. The priority tag ranges from 1 to 7.
ethernet_type - Specify the Ethernet type.
<hex 0x0-0xffff> - Specify the Ethernet type.
ip - Specify an IP access control list rule.
vlan - Specify the VLAN name.
<vlan_name 32> -Specify the VLAN name. The maximum length is 32 characters.
vlanid - Specify the VLAN ID.
<vlanid 1-4094> - Specify the VLAN ID between 1 and 4094.
mask - (Optional)Specify the mask.
<hex 0x0-0x0fff> - Specify the mask.
source_ip - Specify an IP source address.
<ipaddr> - Specify an IP source address.
mask - (Optional) Specify the mask.
<netmask> - Specify the mask.
destination_ip - Specify an IP destination address.
<ipaddr> - Specify an IP destination address.
mask - (Optional) Specify the mask.
<netmask> - Specify the mask.
dscp - Specify the value of DSCP.
<value 0-63> - Specify the value of DSCP. The DSCP value ranges from 0 to 63.
icmp - Specify the ICMP.
type - (Optional) Specify that the rule will apply to the ICMP Type traffic value.
<value 0-255> - Specify the value between 0 and 255.
code - (Optional) Specify that the rule will apply to the ICMP Code traffic value.
<value 0-255> - Specify the value between 0 and 255.
igmp - Specify the IGMP.
type - (Optional) Specify that the rule will apply to the IGMP Type traffic value.
<value 0-255> - Specify the value between 0 and 255.
tcp - Specify TCP.
src_port - (Optional) Specify that the rule will apply to a range of TCP source ports.
<value 0-65535> - Specify the value between 0 and 65535.
mask - (Optional) Specify the mask.
<hex 0x0-0xffff> - Specify the mask.
dst_port - (Optional) Specify that the rule will apply to a range of TCP destination ports.
<value 0-65535> - Specify the value between 0 and 65535.
mask - (Optional) Specify the mask.
<hex 0x0-0xffff> - Specify the mask.