D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
176
Example
To enable the automatic configuration of link local address for an interface:
DGS-3420-28SC:admin#enable ipif_ipv6_link_local_auto interface1
Command: enable ipif_ipv6_link_local_auto interface1
Success.
DGS-3420-28SC:admin#
11-10 disable ipif_ipv6_link_local_auto
Description
This command is used to disable the auto configuration of link local address when no IPv6 address is
explicitly configured.
Format
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Parameters
<ipif_name 12> - The name of the interface.
all - All of the IP interfaces.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the automatic configuration of link local address for an interface:
DGS-3420-28SC:admin#disable ipif_ipv6_link_local_auto interface1
Command: disable ipif_ipv6_link_local_auto interface1
Success.
DGS-3420-28SC:admin#
11-11 show ipif_ipv6_link_local_auto
Description
This command is used to display the link local address automatic configuration state.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English