D-Link xStack DGS-3420 Series - Page 187

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
182
12-6 show bpdu_protection
Description
This command is used to display BPDU protection global configuration or per port configuration and
current status.
Format
show bpdu_protection {ports {<portlist>}}
Parameters
ports - (Optional) Specify all ports to be displayed.
<portlist> - (Optional) Specify a range of ports to be displayed.
Restrictions
None.
Example
To display BPDU protection information for the entire switch:
DGS-3420-28SC:admin#show bpdu_protection
Command: show bpdu_protection
BPDU Protection Global Settings
---------------------------------------
BPDU Protection Status : Disabled
BPDU Protection Recover Time : 60 seconds
BPDU Protection Trap State : None
BPDU Protection Log State : Both
DGS-3420-28SC:admin#
To display BPDU protection status for ports 1 to 3:
DGS-3420-28SC:admin#show bpdu_protection ports 1-3
Command: show bpdu_protection ports 1-3
Port State Mode Status
----- ----------- ---------- -----------
1 Disabled Shutdown Normal
2 Disabled Shutdown Normal
3 Disabled Shutdown Normal
DGS-3420-28SC:admin#