xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
208
Example
To delete the CFM link trace reply:
DGS-3420-28SC:admin#delete cfm linktrace mepname mep1
Command: delete cfm linktrace mepname mep1
Success.
14-22 config cfm mp_ltr_all
Description
This command is to enable or disable the "all MPs reply LTRs" function. This function is for test
purposes. According to IEEE 802.1ag, a Bridge replies with one LTR to an LTM. This command can
make all MPs on the LTM’s forwarding path reply with LTRs, no matter whether they are on a Bridge
or not.
Format
config cfm mp_ltr_all [enable | disable]
Parameters
enable - Enable this feature.
disable - Disable this feature.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the all-MPs-reply-to-LTR function:
DGS-3420-28SC:admin#config cfm mp_ltr_all enable
Command: config cfm mp_ltr_all enable
Success.
To Next Page
Loading...
Need help?
General