D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
225
17-2 show route preference
Description
This command is used to display the route preference of each route type.
Format
show route preference {[local | static | default | rip]}
Parameters
local - (Optional) Display the preference of local route.
static - (Optional) Display the preference of static route.
default - (Optional) Display the preference of default route.
rip - (Optional) Display the preference of RIP route.
Restrictions
None.
Example
To display the route preference for all route types:
DGS-3420-28SC:admin#show route preference
Command: show route preference
Route Preference Settings
Protocol Preference
---------- ----------
RIP 100
Static 60
Default 1
Local 0
DGS-3420-28SC:admin#
17-3 create route redistribute dst rip src
Description
This command is used to redistribute routing information from other routing protocols to RIP. When the
metric is specified as 0, the metric in the original route will become the metric of the redistributing RIP
routes transparently. If the metric of the original routes is greater than 16, the route will be not
redistributed.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English