D-Link xStack DGS-3420 Series - Page 286

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
281
20-5 show dhcp_local_relay
Description
This command is used to display the current DHCP local relay configuration on the switch.
Format
show dhcp_local_relay
Parameters
None.
Restrictions
None.
Example
To display the local DHCP relay status:
DGS-3420-28SC:admin#show dhcp_local_relay
Command: show dhcp_local_relay
DHCP/BOOTP Local Relay Status : Disabled
DHCP/BOOTP Local Relay VID List : 1,3-4
DGS-3420-28SC:admin#