D-Link xStack DGS-3420 Series - Page 299

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
294
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the DHCP relay function:
DGS-3420-28SC:admin#enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3420-28SC:admin#
21-17 disable dhcp_relay
Description
This command is used to disable the DHCP relay function on the switch.
Format
disable dhcp _relay
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the DHCP relay function:
DGS-3420-28SC:admin#disable dhcp_relay
Command: disable dhcp_relay
Success.
DGS-3420-28SC:admin#