D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
314
22-19 create dhcp class
Description
This command is used to create a DHCP class. Administrators can create a DHCP class with a name
that is a symbolic string, like "class1”.
Format
create dhcp class <class_name 12>
Parameters
<class_name 12> - Enter the DHCP class’s name used here. This name can be up to 12
characters long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a DHCP class:
DGS-3420-28SC:admin#create dhcp class class2
Command: create dhcp class class2
Success.
DGS-3420-28SC:admin#
22-20 config dhcp class
Description
This command is used to add or delete an option to or from DHCP server class. The user can use the
string or hex parameters to add a value for the option. The value of DHCP client packet’s option needs
exactly match it. The user can use a wildcard character “*” to use a partial match for the specified
string.
Format
config dhcp class <class_name 12> [add option <int> [string <multiword 255> | hex <string
255>] | delete option <int>]
Parameters
class - Specifies the DHCP class name used.
<class_name 12> - Enter the DHCP class name used here. This name can be up to 12

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English