xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
27
Example
To reset all the switch parameters except the IP address:
DGS-3420-28SC:admin#reset
Command: reset
Are you sure you want to proceed with system reset
except IP address, log, user account and banner?(y/n) y
Success.
To reset the system configuration settings:
DGS-3420-28SC:admin#reset config
Command: reset config
Are you sure to proceed with system reset?(y/n)
Success.
To reset all system parameters, save, and restart the switch:
DGS-3420-28SC:admin#reset system
Command: reset system
Are you sure to proceed with system reset, save and reboot?(y/n)
Loading factory default configuration… Done.
Saving all configuration to NV-RAM… Done.
Please wait, the switch is rebooting…
2-23 login
Description
This command is used to log in to the switch.
Format
login
Parameters
None.
To Next Page
Loading...
