D-Link xStack DGS-3420 Series - Page 323

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
318
Example
To configure ping packets:
DGS-3420-28SC:admin#config dhcp ping_packets 4
Command: config dhcp ping_packets 4
Success.
DGS-3420-28SC:admin#
22-24 config dhcp ping_timeout
Description
This command is used to specify the amount of time the DHCP server must wait before timing out a
ping packet.
By default, the DHCP server waits 100 milliseconds before timing out a ping packet.
Format
config dhcp ping_timeout <millisecond 10-2000>
Parameters
<millisecond 10-2000> - Specify the amount of time the DHCP server must wait before timing out a
ping packet. The default value is 100.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the time out value for ping packets:
DGS-3420-28SC:admin#config dhcp ping_timeout 500
Command: config dhcp ping_timeout 500
Success.
DGS-3420-28SC:admin#
22-25 create dhcp pool manual_binding
Description
This command is used to specify the distinct identification of the client in dotted-hexadecimal notation
or hardware address.